Sculptural bespoke chandelier with the best light output for dining table, conference table or any wide working table. This chandelier uses the successful rotating stem structure of the Orbitale collection and features an architectural low and large cylinder light source on each arm’s end. I designed the chandelier arms with two lengths so that each can be staggered on different angle. They work well in any space and have the possibility to fit wonderfully regular and low ceiling rooms. The best feature is that it is ideal for a dining room, over a rectangular dining table. In order to decide the two lengths I placed the shades evenly spaced over a regular rectangular dining table footprint and designed the arms length accordingly. See last picture with the schematic. The result is a uniform illumination over a dining table. There is nothing like that in the market. There are beautiful chandeliers but always giving too much light in the center and low at the heads. Each shade has two led strip that can be lit separately. So you have a regular light and a stronger light depending on the use of the chandelier. Led is top quality with CRI above 90. This insures perfect natural color of food…. and people. See photo before the last where I placed some fruit and a color chart below the chandelier (a la Caravaggio). Led are on a 24V direct current feed, so no flickering. See video. Arms can rotate 180 degrees to reach any possible combination. Beside the dining table with two rows of lights evenly spaced, regular 8 arm star or 4 arm star (see photos) or just sculptural random. Chandelier can be rotated lit. Shades can rotate on the arm axis to fulfill any lighting need of a living room (paintings, bookshelves and so on). Each shade has a pure white glass for fixtures (it’s a layer of two clear glass and a white inside for pure white output.). See photos. On the back a Lucite smaller opening for giving ambiance light. Chandelier keeps the successful brass finishes of the orbitale collection. Natural brass acid cleaned on the stem and cymbal finish on the spun pieces. I am listing with the measurements for dining table and with a minimal drop. Please see last image for all sizes. Drop will always be customized. Silvio Piattelli copyright and design. Technical part. See last photo for measurements. LED: Each disc has two 65 cm separate led strip using each 8 watts. CRI above 90 and 136 lumens/watt. Total light output inside the shade: one circuit 1080 lumens, two circuits 2160 lumens. Total chandelier 8640 one circuit, 17280 all circuits. Two drivers in the canopy that keeps the same shape of the shades. 24 volts DC. Thus no flickering. See video. Shades are connected to the arms with a two movement joint. The up and down has a set screw with the purpose or setting perfect horizontal after receiving the chandelier. The axial rotation is instead free (max 360°) for illuminating wall, library, painting etc.
Length of central stem can be adjusted to designer’s request. Driver to receive your country current. On customized size, schematic will be sent for final approval. Possibility to change arm’s length.